Hi
I have a Problem with a new DirectAccess installation.
Two leg server, one NIC in the DMZ (public IP) and one NIC in the LAN (private
IP).
I cloud run all wizards successfully and could finish
the configuration. GPOs were created and the DA server GPO is applied to the DA
Server. All fine.
But under Server Status I have the following error:
Configuration for Server <servername> retrieved from the Domain
Controller cannot be applied.
And under Operational Status I see that DNS and NAT64
is not working:
In the Event Log
I have the following not very useful error:
Someone an idea how to troubleshoot that issue or what
the root case could be?
Thx!