Upon configuring RRAS on a server to allow VPN connections, all the client PC's on the LAN lost connections to the server and could not access the internet.
History:
I configured RRAS to allow VPN access and NAT.
Upon completion of the configuration, I drilled down to IPv4 and could not find the NAT.
I read an article suggesting the Routing may not have been installed. Sure enough it was not, so I disabled RRAS and installed Routing.
Then I configured and enabled RRAS once again.
It was at this moment all client PC’s on the LAN lost connection to the server and the internet.
The server still had internet access.
Environment:
Server 2008 SP2 (DNS Server, DHCP Server)
Clients: Window 7 Pro SP1
While the server is the DHCP server, all client PC’s have static IP addresses.
I don't know enough about RRAS and how it has affected the access between client and server.
While a fix would be great, if you have any information that could point me in the right direction, that would be welcomed too.
Thank you in advance