I had a Win2000 DHCP server on vlan400 / 10.x.4.x with a superscope for the top three floors of the office and a separate scope (10.x.7.x) for the network staff in the basement (vlan700). This has been working well for years...
The Win2000 server just died (hardware) and I can't find the backup I had for it (Yes, I'm an idiot ;-).
I re-created the scopes from memory on a win2008 server (DC) and the superscope works great, but the 10.x.7.x scope for the Vlan700 is not working.
There has been no changes in any of the switches/routers, etc. so they are still all good. Just the DHCP server.
Question: What do I need to do on the DHCP server to get the clients on the vlan700 to get their 10.x.7.x addresses without preventing the DHCP server from continuing to use the superscope for the clients on the vlan400?
Remember all worked, sever died, not working now - server/config issue.
Thank you in advance for your help.