Ever since my switch to 2008 R2 when it was first released, I have been unable to delete glue records. MMC asks if I really want to delete the glue record ("Do you want to delete the glue records ______?"), but freezes before I can click Yes or No. Alt + Y/Alt + N doesn't get past it; the only way to continue is to end the process with the task manager/procexplorer, then open a new instance of MMC. The glue record remains, undeleted, seemingly impossible to remove.
I've noticed that in some cases where we've renamed systems and they reboot, the systems will register the old and new computer name in DNS. Here's an example from the DHCP logs
11,08/13/15,07:46:55,Renew,10.17.205.223,5TH-86032.mydomain.com,9C8E99DE5F7F,,3179929243,0,,,
32,08/13/15,07:46:55,DNS Update Successful,10.17.205.223,HOC-86032.mydomain.com,,,0,6,,,
32,08/13/15,07:46:55,DNS Update Successful,10.17.205.223,5TH-86032.mydomain.com,,,0,6,,,
The new name is 5TH-86032 but the old name, HOC-86032, is still registering. I can't figure out how to prevent this. This HP systems have vPro enabled on them so that may be a possibility.
Orange County District Attorney
Hi..
I need to create a public DNS server (example: google DNS server). I know configuring DNS server on windows Server 2012 R2. but how i will make on public DNS Server like i'm using ISP DNS server.
Regards,
Mari Kannan T
Hi, I have just installed Windows 2008r2 and NPS (Radius). Everything in configure NPS seems correctly and NPS service is started/running. After added Netgear AP IP with Secret in NPS Client as it should, however, the client fails to authenticate to NPS, In Windows 2008, I installed the Wireshark and captured packet. I configured client PEAP authentication, I see everytime, client sends Access-Request (port 1812), the Windows 2008r2 NPS responses: xxx... (Port Unreachable), it seems to me that NPS is not running; therefore port 1812 is not listenning. But I ensure that NPS was running, Stop and Restart NPS no help.
Any help are appreciated. Tim.
Hello experts,
I am suddenly having error in connecting to SSTP VPN on Server 2008 based RRAS server. The error code I am getting is "0x800703E3 The I/O operation has been aborted because of either a thread exit or an application request"
Any suggestions to solve this error.
Thanks
Sir,
We are facing difficulties to access some of websites from our Private Network(Inside Network Connected through SonicWALL 8500).
We have raised a complaint to SonicWALL. They told that, There is problem with DNS Server. But, I am not able confirm and conclude that, whether it is DNS Problem. Because, All other Website's are opening fine. No issue with that.
This is our Scenario. We are having Two ISP's. We have connected these two ISP Links to SonicWALL 8500. These two ISP are configured in Load balancing Method in SonicWALL. We are having 4 DNS Server's in Public IP's and Two DNS Server's in our Local Network for Local Users.
We are facing this issue in our Local Network only(Which is connected to the Internet through SonicWALL ). We have checked these Sites from our both ISP IP's directly. It is working fine.
What are the steps to identify whether it is DNS Problem? Also, From SonicWALL side they asked us to add our Outside DNS IP address in our Local DNS(Inside DNS). Is it required?
In my point of view, Without this IP entry all other websites are working fine. Is it required?
Please help us to resolve this issue.
Thavamani Shanmugam
Hi,
I am using Windows Server 2012 R2. I am deploying Direct Access on it. I don't have any internal LAN and both the interface are public IP enabled. I want to change network profile to public, currently which is domain authenticated. I have tried to change it to public via power shell using this command
set-NetConnectionProfile -InterfaceAlias external -NetworkCategory Public
but no luck server is showing an error
set-NetConnectionProfile : Unable to set the NetworkCategory due to one of the following possible reasons: not running
PowerShell elevated; the NetworkCategory cannot be changed from 'DomainAuthenticated'; user initiated changes to
NetworkCategory are being prevented due to the Group Policy setting 'Network List Manager Policies'.
At line:1 char:1
+ set-NetConnectionProfile -InterfaceAlias external -NetworkCategory Public
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : PermissionDenied: (MSFT_NetConnect...F150E6258CCC}"):root/StandardCi...nnectionProfile)
[Set-NetConnectionProfile], CimException
+ FullyQualifiedErrorId : MI RESULT 2,Set-NetConnectionProfile
As error showing I have also tried Network List Manager Policy from Group Policy but the problem remain same.
Can someone please help me as I am unable to deploy direct access because of this.
Thanks, Manoj
Hi,
I'm new to the hole Windows Server 2012 thing but currently I'm trying to configure my server in the correct way.
It's a file server and I connect via VPN to it. Now I'm fighting with some firewall settings. My goal is, that i can access shared folders only through the local IP address. I set the Ip range of the VPN from 10.10.10.1 to 10.10.10.255.
Although i disabled file sharing for all network profiles, i can still access over the local Ip of the server (10.10.10.1). Why is this possbile?
A second thing what I'm trying to figure out is: How can i configure the firewall, that i can not open a shared folder through the public ip adress of the server. Even if i set the remote adress for the firewall rules to local subnet, i can still access through the public ip when I'm connected to VPN.
Thanks for your help!Hello,
Currently We are using KMS Server 2008 R2. to activation of the windows 7 and MS-OFFICE .
Now I wanted to ADD windows 10 Volume Key Kindly help me to know the step by step procedure for the same.
please mail me on prashant.raut@live.com
Thanks,
Prashant Raut.
I have a windows domain controller (server 2012 R2) with nameserver configured.
Only one domain exists.
For contents filtering I am using OpenDNS and set up forwarders to these nameservers instead of "normal ones".
This works fine, but I would like requests from certain machines (or even better, certain users) to be forwarded to the "normal" nameservers instead of OpenDNS.
I still want these certain machines or users adapters to point at the local nameserver for resolving queries to local resources, which means that I cannot tweak DHCP to anything special for these machines.
Is this possible with only one windows domain ?
Hi Guys
In a couple of weeks we will migrate our DNS / DHCP Services from Infoblox Boxes to Windows Server 2008 R2.
Migrating the DHCP part will be an easy step, so it is not necessary to talk about it.
The first and very important step is migrating the DNS.
I've read a lot about the migration and how it should be going. I've also chatted with our technology partner and have now a lot of information about the situation.
But I'm not sure what would be the best approach to finalize the migration successfully.
Has somebody experience with DNS migrations like this? Any help would be very appreciated!
We have two domain controllers and the DNS should be installed on this two dcs, ad integrated.
The main question is, can we build the microsoft dns concurrently to the infoblox dns?
Or is there another procedure or circumstances, which require other steps to go forward?
We have only a few DNS entries in Infoblox, which must be migrated or created in the microsoft dns. So importing the whole dns data from Infoblox is not necessary.
What we know is, that we must change the DNS entries manually on every server, switches and the firewall.
Do the DCs register in the new DNS properly when we reconfigure the DNS server entries?
Thanks for any answer.
Regards, Pascal
Hi everyone,
I a new too this, so please be patient with me. I am trying to sync client time with the server time. We have PC's on the factory floor called Clock in that require the engineer too clock in after at the begin and end of the task. I am having trouble getting the clock in machines’ to sync with the DHCP server Windows’ Server 2003 SE SP1 which has the w32tm.
I have tried a few ways to configure the time sever but I keep getting
C:\Documents and Settings\nrothwell>w32tm /resync /rediscover
Sending resync command to local computer...
The computer did not resync because no time data was available.
I do not want the time server to obtain the time from a external source but from the DHCP server its self.
I have used the following: http://support.microsoft.com/default.aspx/kb/929276 and it still has not resolved my problem. I am not sure if I have changed the reg settings correctly.
I have aslo read the following: www.mmmug.co.uk/files/216/download.aspxwhich is very good and useful. I just can’t seem to get my head around this problem.
Please help
Kind Regards
Nigel
Assuming the following configuration:
-the RRAS server (Win Server 2012 R2) has two NICs: one connected to the Internet with the public IP address 133.33.33.33, the other one connected to the Internal network with the IP address 10.1.100.250 (there is no NAT in my DMZ).
Internet interface:
Intranet interface:
-my VPN clients are getting IP addresses from the DHCP: 172.16.1.0/24
-RRAS configured for VPN access (so enabled as an IPv4 router for LAN too)
-IPv4 forwarding enabled
-RRAS filters are disabled
My VPN clients are properly getting IP address from the DHCP server in 10.1.100.0 subnet but my issue is that if I don't configure any IPv4 static routes in the RRAS management console the VPN clients are unable to communicate with the internal network. I don't mind configuring static routes for my internal network but I would like also to have the VPN clients using Internet through the VPN tunnel but it's going to be an annoying job to summarize the public internet IPs...
PS: I tried DirectAcces but most of my client applications are not compatible with IPv6.
We have so many time facing this issue error code "8007000E" <o:p></o:p>
We have visiting the Windows website as getting error code "8007000E", Please help! <o:p></o:p>
We have tried to basic troubleshooting but no success, Readiness tool and windows diagnostics tool but no success<o:p></o:p>
General Windows Update Troubleshooting <o:p></o:p>
The following outlines how to stop services pertaining to Windows Update, rename system folders, register related DLL files, and then restart the previously mentioned services. This troubleshooting generally applies to all Windows Update related issues.<o:p></o:p>
Stopping services pertaining to Windows Update <o:p></o:p>
1. Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.<o:p></o:p>
2. If you receive a notification from User Account Control simply click Continue.<o:p></o:p>
3. At the command prompt, type the following, commands and then press ENTER after each command.<o:p></o:p>
net stop wuauserv
net stop bits <o:p></o:p>
net stop cryptsvc <o:p></o:p>
4. Please do not close the Command Prompt window.<o:p></o:p>
Renaming folders pertaining to Windows Update <o:p></o:p>
1. At the command prompt, type the following commands, and then press Enter after each command:<o:p></o:p>
2. ren %systemroot%\System32\Catroot2 Catroot2.old <o:p></o:p>
3. ren %systemroot%\SoftwareDistribution SoftwareDistribution.old <o:p></o:p>
4. Please do not close the Command Prompt window.<o:p></o:p>
Registering DLL’s pertaining to Windows Update <o:p></o:p>
1. Please copy and paste the following text into a new Notepad document, and save the file as WindowsUpdate.BAT<o:p></o:p>
2. If saved correctly the icon will change from a Notepad file to BAT file which has two blue cogs as its icon.<o:p></o:p>
-or-<o:p></o:p>
3. You can manually type each command at the command prompt:<o:p></o:p>
regsvr32 c:\windows\system32\vbscript.dll /s <o:p></o:p>
regsvr32 c:\windows\system32\mshtml.dll /s <o:p></o:p>
regsvr32 c:\windows\system32\msjava.dll /s <o:p></o:p>
regsvr32 c:\windows\system32\jscript.dll /s <o:p></o:p>
regsvr32 c:\windows\system32\msxml.dll /s <o:p></o:p>
regsvr32 c:\windows\system32\actxprxy.dll /s <o:p></o:p>
regsvr32 c:\windows\system32\shdocvw.dll /s <o:p></o:p>
regsvr32 wuapi.dll /s <o:p></o:p>
regsvr32 wuaueng1.dll /s <o:p></o:p>
regsvr32 wuaueng.dll /s <o:p></o:p>
regsvr32 wucltui.dll /s <o:p></o:p>
regsvr32 wups2.dll /s <o:p></o:p>
regsvr32 wups.dll /s <o:p></o:p>
regsvr32 wuweb.dll /s <o:p></o:p>
regsvr32 Softpub.dll /s <o:p></o:p>
regsvr32 Mssip32.dll /s <o:p></o:p>
regsvr32 Initpki.dll /s <o:p></o:p>
regsvr32 softpub.dll /s <o:p></o:p>
regsvr32 wintrust.dll /s <o:p></o:p>
regsvr32 initpki.dll /s <o:p></o:p>
regsvr32 dssenh.dll /s <o:p></o:p>
regsvr32 rsaenh.dll /s <o:p></o:p>
regsvr32 gpkcsp.dll /s <o:p></o:p>
regsvr32 sccbase.dll /s <o:p></o:p>
regsvr32 slbcsp.dll /s <o:p></o:p>
regsvr32 cryptdlg.dll /s <o:p></o:p>
regsvr32 Urlmon.dll /s <o:p></o:p>
regsvr32 Shdocvw.dll /s <o:p></o:p>
regsvr32 Msjava.dll /s <o:p></o:p>
regsvr32 Actxprxy.dll /s <o:p></o:p>
regsvr32 Oleaut32.dll /s <o:p></o:p>
regsvr32 Mshtml.dll /s <o:p></o:p>
regsvr32 msxml.dll /s <o:p></o:p>
regsvr32 msxml2.dll /s <o:p></o:p>
regsvr32 msxml3.dll /s <o:p></o:p>
regsvr32 Browseui.dll /s <o:p></o:p>
regsvr32 shell32.dll /s <o:p></o:p>
regsvr32 wuapi.dll /s <o:p></o:p>
regsvr32 wuaueng.dll /s <o:p></o:p>
regsvr32 wuaueng1.dll /s <o:p></o:p>
regsvr32 wucltui.dll /s <o:p></o:p>
regsvr32 wups.dll /s <o:p></o:p>
regsvr32 wuweb.dll /s <o:p></o:p>
regsvr32 jscript.dll /s <o:p></o:p>
regsvr32 atl.dll /s <o:p></o:p>
regsvr32 Mssip32.dll /s <o:p></o:p>
Restarting services pertaining to Windows Update <o:p></o:p>
1. Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.<o:p></o:p>
2. If you receive a notification from User Account Control simply click Continue.<o:p></o:p>
3. At the command prompt, type the following, commands and then press ENTER after each command.<o:p></o:p>
net start wuauserv
net start bits <o:p></o:p>
net start cryptsvc <o:p></o:p>
exit <o:p></o:p>
Hi,
In my company we have a TFS Server 2013 Update 5, linked to an AD. The AD has two domains (I changed the name) :
The TFS server is configured to contain :
First, I have a question :
Is there a way to restrict the view, for external users (in the tree domain called out.microsoft.be), to only view the bugs they entered ? So, by the same way, they won't be able to see any other things, like : projects, tasks, and so on.
Apparently it is impossible in TFS 2013, even with update 5, because the Stackeholder role has still an access to others work items. Is it really true and impossible to do a workaround ?
Regards,
Arnaud Helin
Hi all;
Suppose I have set up a scope in SRV01 to be in Active mode. Is it possible to change its state to Standby mode (on the fly) without deconfigurig it and then configuring it again with my desired configuration?
Thanks
Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
I've read conflicting articles about remote administration of external DA clients. One Technet blog here http://blogs.technet.com/b/edgeaccessblog/archive/2010/09/14/how-to-enable-remote-desktop-sharing-rds-rdp-from-corporate-machines-to-directaccess-connected-machines.aspx says:
"Because we use IPv6 in Direct Access, any corporate client that wants to communicate to the DirectAccess clients must have an IPv6 address. We can set up either a real IPv6 addressing scheme or set up ISATAP, which does not require IPv6 aware routers, switches or hubs".
But then when I read anything about configuring DA anywhere else on Technet it says using ISATAP on the corporate network is not supported.
Confused???
Dear Team,
Please help what are the steps do i need to take before upgrading my DC from Win 2k8 to 2012 Data-center.
Regards, Kumar.V