Remove DNS zone transfer partner from all zones
I recently noticed that there is an additional computer listed in the Zone Transfers tab of all of my DNS zones (allowing zone transfers to that server). I could manually remove the server from all...
View ArticleCan't find domain after domain controller failure
I had three DCs on a windows server 2008 network. One running Win Server 2008, and the other two Win Server 2008 r2 64-bit. The one running 32 bit died (disc failure). It was due to be de-commissioned...
View ArticleWindows 8.1 with IE 11.0.2 - WPAD issue
Hi there,I am working on an 8.1 SOE and have an issue whereby the wpad.dat file does not seem to apply and there is a 10 second delay every time IE 11 loads, before our intranet page is displayed...
View ArticleDHCP Conflict Detection & Win 7 Firewall..
This may be a stupid question, but I can't quite find the answer.... We have a small network, about 200 computers (Server 2012), Win 7 workstations (Very Few XP's left) I had one workstation...
View ArticleNPS netbios domain error
Hi I am having very slow and often no logons from laptops using NPS.I am getting the following errors and would like to get rid of them as one possible reason.We have 3 domain controllers and NPS is...
View ArticleServer 2012 R2 DirectAccess Multi-site configuration
Hello,I am hoping if someone can answer me a question on DirectAccess multi-site. Let me outline the configuration of the sites and the clients:Seven separate physical sites, one main data centre, one...
View ArticleACL
Hi,1)How to remove permission to specific users for sub folders but which are already inherited with parent folder using icacls command?2)while I was trying to run this command ( icacls \\example\Home...
View ArticleDnssec not working properly
I am experiencing random failures with my dns server whenever dnssec validation is turned on.Sometimes the server just fails to get the response from the forwarder. This happened on 2012. Unfortunately...
View ArticleDNS resolving to external IP when ping.
Hi expert folks...have a question....when pinging to some of the client with in the LAN it resolve to external public IP instead of private IP ...i had checked and confirmed the client that that...
View Article2008R2 NPS and wireless access
We are setting a new wireless environment for both Guests and Internal access (two different networks). We use a cisco WLC 4402 to control wireless access. I have setup NPS for guest access and it...
View ArticleDCA 2.0 does not start with Event ID 7024
Hi,we just installed the DirectAccess Connectivity Agent 2.0 on some Win7 machines. The service starts pretty fine until we configured the ADMX GPO template file that were delivered with the DCA 2.0....
View ArticleError Code: 0x4004F00D
I have bought the Office 365 University since 05 September 2013 then the error window pop-up withError Code: 0x4004F00D for almost a month.Due to online purchase, I have no the product key. Therefore,...
View ArticleShared folder not reachable from one country
We have certain users migrated from a domain and they lost access to shared folder. These folders are in different country and people from other country cannot access the folders.
View ArticleHow to push GPO on remote client connected through VPN
Hi experts,When a machine is connected to companies network via VPN connection/client. Is it possible to update the GPO on that machine ?Ex- If a remote laptop users is connected to companies network...
View ArticleThe Remote Procedure Call (RPC) is unavailable when trying to remotely...
Hello!I operate on a Windows Server 2012 R2(Which is the server for Active Directory) and I am trying to remotely shutdown a Windows 8.1 computer(which is in the domain).I am using PowerShell to do...
View ArticleServer 2008 DHCP assigns leases but never displays leases in the GUI
Well, the subject says it all.I have a newly installed 2008 Server with a DHCP role. It correctly assigns new machines IP addresses but when I use the GUI MMC the leases do not show.The DHCP database...
View ArticleServer 2008 DHCP is handing out the wrong DNS server.
We have two new 2008 DC that handles, DNS, DHCP and WINS. Our DHCP scopes have been migrated to these servers. We are seeing some random issues where clients are using the new dhcp server but the old...
View ArticleDHCP - I need to migrate one scope and its leases to another DHCP server
I'm trying to consolidate all my scopes onto one DHCP server. I have basically been deleted scopes from old DHCP server and then having the client pickup their IP from new DHCP server scope. I'm left...
View ArticleUnable To Ping Manually Added DNS Entries
Hi,I created a new Forward Lookup Zone (say, somedomain.biz) in my DNS server and added a new DNS entry to point a name (sts) to a existing server's ip address. When I ping the full name e.g....
View ArticleUnable to resolve the URL to a valid IP address when setting up DirectAccess
I'm setting up a DirectAccess server, and running through the setup wizard. On step 3, it's asking for the url of the Network Location Server. I give...
View Article