Hi,
I've recently setup a ikev2 and all seems to work ok. The only issue I have is that once the VPN is connected the users cannot access the Internet unless I untick the 'Use Default Gateway' in the VPN setting within the client. But if I do this they can only connect to one remote mapped drive I have. I have added all the static routes into the RRAS server but this doesn't make a difference unless I keep the 'Use Default Gateway' option ticked and they can connect to all drives mappings. I've been told I have two options:-
1.Keep the setting "use default gateway on remote network" enabled and enable the NAT for VPN clients on RRAS server.
2.Disable the setting "use default gateway on remote network" and add static routes on the clients.
Obviously I need to go with option 1, but I'm a bit stuck on what I need to do next. I've added the NAT protocol using this write-uphttps://technet.microsoft.com/en-us/library/dd458971(v=ws.11).aspx I've put both the INTRANET and INTERNET into the NAT section and this didn't work. I've also looked at the inbound and outbound filters on the Internet and cannot see what the issue it. Has anyone got any detailed advice on what I need to do to allow my VPN Client users to have Internet access once they are connected?
Thanks