DirectAccess 2012 - Best way to deploy between two firewalls (NAT'd)
We are deploying DirectAccess 2012 and have a requirement that traffic from the internet (red) must be proxied through the DMZ (yellow) before touching anything on the internal network (green). I will...
View ArticleRRAS VPN use Certificates
HiI want to know how to configure my RRAS to use Certificates instead of Username/PasswordCurrent ConfigDMZ-RAS-01 (Virtual on Vmware in the DMZ) with 2 NICS 1 in DMZ and 1 in Live EnvironmentDMZ...
View ArticleAutomate Adding RADIUS Clients
I have a large number of RADIUS clients (AP's) I need to add to IAS. Is there an automated method for adding clients? i.e. import from csv, etc.Thank you,Paul
View ArticleNPS Support Radsec?
We have a requirement from a customer of ours to stand up a Radius server using RADSEC (Radius over TLS). Does MS support this configuration, or will we have to bring up a third party solution, such as...
View ArticleGlobalNames zone problems
I am trying to set up globalnames zone to work on Windows 2008R2. A domain mydomain.dir contains just two DCs and no other servers.I created it as described in...
View ArticleEither permanently remove or fix IPv6
Anyone know, how to fix an IPv6 or remove completely from server 2012? I dont' have any infrastructure to support IPv6. I have an application server, which required fixed/permanent IP. I have...
View ArticleEnable Lan Routing Windows Server 2012
Hi! I'm trying to setup the RRAS in a Windows server 2012 to route between my two networks. I have a windows server 2012 with two nics and the RRAS installed. I installed "Lan Routing" custom option....
View ArticleClik here to view.
DHCP Failover Server 2012
Hi,I have a Problem with DHCP Failover in Windows Server 2012 We configured 2 Windows Server 2012 with DHCP Role and created a Scope with loadbalancing algorithm.The Problem is, that the two DHCP...
View ArticleNPS Event 6273 Reason Code 16
We're in the midst of relocating our RADIUS role from a 2003 DC to a 2008 R2 member server.The following features have been installed and configured:Network Policy ServerRouting and Remote Access...
View ArticleSevere error in Win2K8 R2 netsh routing ip nat context: can not set global...
I tried to set up a Full NAT, RemoteAccess + IpNAT (not ICS), on Windows Server 2008 R2. I found out that you can't set the global NAT parameter, `netsh routing ip nat set global ...`, without giving...
View ArticleError during upload of files greater > 5GB to IIS using Transfer Chunked...
Hello,We have adapted Transfer-Chunked encoding implementation to support upload of file >2GB to a Content server which is built as an ISAPI extension. It is C++ code. We are able to upload files...
View ArticleMobile clients spammed with NAT-T keep-alives from RRAS when not connected to...
Very bizarre and reliably reproducible.Have a mobile client Android 4.4.2 (CM11m7) using L2TP/IPSEC /w PSK to RRAS on W2k8r2 server via AT&T cell network.The client connects to VPN and it works no...
View ArticleHow to enable legacy VPN on direct access 2012R2 server
Hello, I have got a win 2012R2 DA server (2 nics with internal and DMZ range) and I want to enable a legacy SSTP VPN. (not sure if its suggested or not) So far have enabled legacy VPN (with SSTP +...
View ArticleWireless 802.11x Authentication using NPS
Hello,We have a Cisco Aironet 1140 AP that is setup to use RADIUS authentication against our NPS server. The server has a 'Connection Request Policy' setup to use EAP (PEAP) authentication. I have a...
View Article2003>2008 DHCP and NAT...quick question here
Hi all,Long story short, I am working with a 2003 server, This is 1 server that is DC, AD, DNS, DHCP, NAT and Exchange 2003. 2 NICs, one internal and One External. With all the problems on Mulihomed...
View ArticleAdditonal External NIC on RRAS server
We have a Windows 2008 R2 Server acting as a RRAS server offering a VPN service to remote user. At the moment we haveNIC #1 (External) on Non-NAT with its own IP addressNIC #2 (Internal) on our...
View ArticleStandalone CA setup in DMZ
Hi,We are planning to setup Standalone CA server(workgroup) in DMZ. Is it possible and recommended?What are points that we should keep in mind while doing so?We have an option to use Window server 2008...
View ArticleHow do i connect to a vpn behind a double dhcp
I am trying to connect to a computer behind a 192.168.1.0 router. However, the router is located in a building that has a 10.10.0.0 and a static static public IP assigned to the building.So it looks...
View ArticleControl of network bandwidth
Hello everybodyI run a Microsoft 2008 Server. I have my own buisness and so o have some workers.When i hire them they can have there own computers with them to work, to work faster and feel better...
View ArticleChange Wifi DNS to Obtain Automtically
Using Windows Server 2012 R2 Essentials: 1. When I add my laptop to the domain it gets configured to use only the server ip address for the DNS. Which is fine when i am at home. 2. When i leave...
View Article