Clik here to view.
Netsh command error "the command needs a valid scope ip address"
Hi guys,I got an error "the command needs a valid scope ip address" when I use netsh command (Picture 1).My test environment is using subnet mask 255.255.0.0 . Then I test it in another environment...
View ArticleNewbie : PXE:E55 ProxyDHCP service did not reply to request on Port 4011
Hello All,I am a complete newbie in networking and request your help in identifying the likely cause of this issue :ISSUE: In a specific Adsite PC’s are unable to PXE-boot from the network after...
View ArticleNew DHCP Server is not assigning IP Addresses
I have a primary DHCP server set up and working fine. this server is 2003. I have another domain controller that is 2008 that I need DHCP to run on. I did the migration and everything copied over with...
View ArticleNPS Authentication to Trusted domain Issue
I am currently working on an NPS server authenticating to two separate domains. AAA & BBBMy NPS server is a part of domain BBB. When I have my customers login via a web portal if they log in as...
View Articlehow to schedule backup once a week
how to create scheduled backups once a week in Windows Server 2008 R2, or once in two weeks?thanksLasandro Lopez
View ArticleIs it possible to upgrade a Windows 2008 server from stand-alone to cluster?
Hi,I have an existing environment of two stand-alone Windows 2008 Enterprise Hyper-V servers. One is R2 and the other is not. I would like to move to a clustered environment.I am planning on first...
View ArticleInstall pathes\updates before user login
Hi,We have Windows 7 x64 SP1 .Is there any windows server\product\service from where we can install updates\third party updates\ vulnerably patches\AV updates to client system.User cannot login until...
View ArticleDNS failover
We have 1 ip address that everyone uses for dns, for example dns is 192.168.1.49 We use the dns ip address of 192.168.1.49 as a secondary ip address for one of our domain controller. If that domain...
View ArticleDNS server -simple query against this server test fails
Hi alli have a pdc with platform w2k8r2 which is acting as the dhcp and dns server.there is also a forwarded dns server.PDC has a quad network card 1- 192.168.112.282- 192.168.112.303-10.0.0.14-...
View ArticleRouting using server 2008 rt
Hello,I have a test environment setup with an AD server (2008) and an XP client.I have setup the DHCP and DNS services on the AD server and those settings are reaching the client.What I would like to...
View ArticleDomain member server with 2 network cards
HiI have a domain member server SRV01 with 2 network cards:Domain network card:ip: 192.168.15.60mask: 255.255.255.0dns: 192.168.15.2 (DC)External network card:ip: 10.10.10.20mask:...
View ArticleDNS queries contain improper "path"
Servers are Windows 2008R2 VMware based. The two (2) DNS servers are also our two agency domain controllers so it is DNS services running on the domain controllers. We are a state agency and are a...
View ArticleDirectAccess 2012, have connectivity, but shows limited connection
Background:Server 2012 Box - NATed Single NICExternal IP Port 443 forwarded to internal IPdirectaccess.my.domain points to external IPNLS is located on DA serverAD is at a 2008 R2Symptom:Once I connect...
View ArticleError when joining a domain - network path not found
Hey hey, I've been a systems admin for a couple years now and have decided that I want to set up a domain of my own! Just want to a have a 2-3 computers on it in the house and maybe even set up a VPN...
View ArticleCan we configure MS IAS server in Server 2003 to use TCP based communication...
Hi All,Can we configure MS IAS Server ( RADIUS) to use TCP based communication not UDP based ?http://tools.ietf.org/html/rfc6613Regards,Dhruv
View ArticleDNS problem. Simple and Recursive qurey failed. But nslookup test is OK
Hi We have a Windows 2012 server running AD and DNS. Something really weird happened, Simple and Recursive qurey failed. but nslookup test has no problem. Most of the time client are able to join...
View ArticleDHCP | Port Issue
Hi,Recently our DHCP Server has stopped working correctly, in a way that, it will assign a laptop an IP but when the laptop goes wireless it then doesn't receive any connectivity unless given a static...
View ArticleAll lookups for ca.gov time out or fail
Very very odd.I have an 8 Site Active Directory integrated DNS, flat forest, single domain.The two DCs in my primary site are no longer able to do lookups for ca.gov. Not sure what the heck happened...
View ArticleClik here to view.
How to remove stuck PTR (reverse Lookup) record
Windows Server 2008 R2 DNS I accidentally created two invalid PTR records in DNS and I can't seem to delete them, but I would like to. Any ideas? Below is a screenshot from DNS Manager.When I create...
View ArticleMonitor Server 2003 SP2 x32
HiI have recently taken over a site where I need to monitor the servers and network of my customers and would like to use the current Windows Server 2003 server to do so. Installing and using 3rd party...
View Article