Direct Access 2012 - Services don't start after configuration of DA / slow...
Hi everyone. Got an issue with my Direct Access installation on Server 2012 R2. After the role was installed and configured the server seems to operate at a crawl. Remote Access Management Service...
View ArticleDirectAccess force resolution for an external hostname to an internal DNS server
We're using DirectAccess on 2012 R2 and have an internal domain of domain.local and an external of domain.com. I'd like to force resolution for an external hostname: server.domain.com to be resolved by...
View ArticleInternet works fine then stops working till i disable and enable adapter
I've been this problem for about 3 weeks , I have an ISA server 2004 under windows server 2003 connected to WAN and LAN , get internet connection from WAN , the issue is the WAN connection Still...
View ArticleClik here to view.
Problem with Certificate enrollment on Windows 8
Hello,our company uses a certificates (for EFS, email encryption etc.) that has in certificate template enabled setting Archive subject's encryption private key (in request handling tab).On all laptops...
View ArticleRRAS and IP assignment
I have 2012R2 configured as VPN server and everything works OK. The problem that i have is following: I have site-to-site VPN on my firewall which connects my network 192.168.21.0/24 to remote network...
View Article2003>2008 DHCP and NAT...quick question here
Hi all,Long story short, I am working with a 2003 server, This is 1 server that is DC, AD, DNS, DHCP, NAT and Exchange 2003. 2 NICs, one internal and One External. With all the problems on Mulihomed...
View ArticleWindows NPS and variable
Hi,Tell meplease, isconfiguredattributefroma third party.How toassign a valueto this attribute attributeUser-Name,which storesuser loginauthentication on thepassingRadius server.Howcan this be done?
View ArticleDirectAccess works but shows "Connecting"
I have a strange issue with a Windows Server 2012 DirectAccess deployment and a Windows 8.1 client. The client has corporate connectivity via DirectAccess but the status of the connection always shows...
View ArticleCivilization 5 crashes when Loading
My civilization 5 game was working a week prior to when it started to crash. It crashes whenever on the loading screen after like 3 seconds or so. I check for driver updates yesterday (June 4, 2014)...
View ArticleDNS request timed out. timeout was 2 seconds
HiWhy it is saying DNS request timed out was 2 seconds and showing the IPs under non-authoritative answers?This is member DC windows 2008 R2. Primary DNS is set as 127.0.0.1 and secondary DNS is set to...
View ArticleNetwork troubleshooting service windows server 2008
Which network troubleshooting service/application not available on windows server 2008 by default ?
View Articlenetsh advfirewall set global StatefulFTP disable
In the article How to Configure Windows Firewall for a Passive Mode FTP Server , it has been mentioned that stateful FTP filtering should be disabled so that the firewall does not block any FTP traffic...
View ArticlePEAP-MS-CHAPv2 - mobile devices and certificates
I'm looking to secure our wireless infrastructure and CHAPv2 seems to be what we need but I have a couple of concerns.Our external domain is company.net but our internal domain where the NPS server...
View ArticleRRAS VPN use Certificates
HiI want to know how to configure my RRAS to use Certificates instead of Username/PasswordCurrent ConfigDMZ-RAS-01 (Virtual on Vmware in the DMZ) with 2 NICS 1 in DMZ and 1 in Live EnvironmentDMZ...
View ArticleDomain Trust authentication fault
I have two separate domains that I need each users to authenticate in each domain (for Symantec reasons) so I have created a forest trust between them and seem to be missing a step somewhere along the...
View ArticleLimitations in adding IP addresses to conditions
Hi all, we have deployed NPS as a backup radius solution for our 802.1x project.The design incorporates sending a vlan tag back to the switch, so each VLAN on the site has its own network policy to...
View ArticleServer 2008 RRAS Internal adaptor causing duplicate DNS entry for host
I have Server 2008 configured with AD, DNS, DHCP and Routing and Remote Access. The Server is set-up with a static IP address 192.168.127.2 and the DHCP allocates addresses in the range...
View ArticleDNS doubling up
Hi Guys, I have started at a new company and I notice they have a few problems with name resolution. Being that for example in DNS they have 3 different name entries for the same IP. They are not...
View ArticleMultihomed, DHCP and DDNS woes...
This is my setup...Windows 2012 R2 Core servers with 4 NICS to be used for hypervNIC1 - Management network NIC2 - HyperV live-migration network NIC3 - NAS network/iSCSI NIC4 - trunked VLANs for...
View ArticleDDNS and secure updates
I have been playing around with ddns and dhcp to see the affects dns record permissions. I have secure updates enabled and always register prt and a records set. I have 2 DCs with DNS with one having...
View Article